White bathroom lighting with wave lampshade AP608-TLP02


Free shipping

White bathroom lighting wave lampshade with two arms, built at a 45 degree angle. Aged white finish (07). Approximate measurements with lampshade: Width 35cm, height 21cm, depth 22cm.

SKU: AP608-TLP02 Category: Brand:
Guaranteed Safe Checkout

White bathroom lighting with wave lampshade

White bathroom lighting wave lampshade with two arms, built at a 45 degree angle. The functionality of this type of lamp is perfect for illuminating rooms that do not need too much light. Aged white finish (07). Approximate measurements with lampshade: Width 35cm, height 21cm, depth 22cm.

Designed in the shape of a flower, it is solid and made of steel, with carved details. Classic shapes, unexpectedly current and elegant, that surpasses all trends, lightness between design and iron, delicate and strong artisanal manufacturing. This series of vintage bathroom accessories are classic in style, designed for rustic bathroom environments. The vintage bathroom accessories are of good quality, they simulate a real flower.

If what we are looking for are vintage bathroom accessories, there are several products that adapt perfectly to the retro design of this environment. Excellent accessories with a vintage flavor that not only help keep the environment clean, but are important pieces of furniture that beautify the bathroom with a classic style.

Wave lampshade, wall lamp with acid tone glass lampshade, has five petals imitating a tulip in bloom for harmonious or retro environments. It has a range of products in perfect aesthetic harmony with each other. Acid glass lampshade, wave design, 12×12 cm, TLP02


Finishes are given by hand, we refer to the final color of the product. In all products it is possible to choose their finish. We currently have eight different finishes and two additional lacquered ones.

It is free to choose any finish, it does not change the final price of the product. Black (00), aged gold (01), aged copper (02), oxide black (03), brown tone, oxide green (04), oxide blue (05), aged silver (06), aged white (07). Lacquered (51) navy blue, (60) burgundy.

Most of the colors are a treatment (mixture of paints with an application process in which part is applied by hand) and some are spray lacquered, all oven dried.

The process would be as follows, they have an initial layer by immersion in liquid paint and a layer of black lacquered by spray gun and then dried in an oven. Subsequently, the desired tone paint is applied, applied with a brush by hand, and then two coats of colorless lacquer are applied.


Wall light installation

Apply wall with everything necessary for installation. Plastic plugs, screws and keys with the appropriate measurements. These have been previously tested in our factory. No adhesives of any kind are supplied, they may vary depending on the surface.

Installation is simple, similar to any type of luminaire. Installation steps: First, for safety, disconnect the light from the electrical panel. Make the holes you need, where the applique will be placed.

Then place the plate that holds the applique. Cables: You can find three cables in the previous installation. All three are important, two essential for current (brown phase and blue neutral), and one for protection, the ground (yellow green). Types of cables and color: Join the brown cables, which are phase, then the blue cables, which are neutral, and finally, the yellow/green cables, which are ground, to the connection of the wall light.

These cables are joined together using a cable connection strip. Then collect the cables and screw the plate with the appliqué trim and that's it. Turn on the power and check that it works well. All our wall lights are checked, both the operation of the Lamp and the ground protection.

To carry out the installation of the wall light you will need the following tools: A drill to make the holes and the 5 mm drill bit equal to the numbering of the plug and a star screwdriver. For the power strip you will need a small, narrow flat screwdriver.

Electrical protection apply

Rustic wall light are protected against indirect contacts. They have a ground connection to protect derivations. It is advisable to use LED lamps of the power and color that best suits your use. The lamp holder is type E-27 (large) or E-14 (small). Protection index IP20 (Indoor use). Voltage 110-240V 50/60Hz. Use LED bulbs, power and color to choose. Ground connection included.




Transportation is free for orders greater than the following amounts and destinations. We also indicate the increases for smaller orders.

Delivery time 10 days

Destination Cost Free Bills
Peninsular Spain and Portugal 5 €    
Spain Balearic Islands 15 € 100 €  
Spain: Canary Islands, Ceuta and Melilla 40 € €100 minimum 40 €
Germany, Austria, France, Belgium, 15 € 100 €  
Holland, Denmark, Italy, Luxembourg 15 € 100 €  
Ireland, United Kingdom, Switzerland and Norway 40 € €100 minimum 40 €
Rest of destinations CONSULT      

Cost: Shipping costs

Free: For purchases greater than… or minimum order

Expenses: Customs expenses (DUA) or shipping More information on shipping and returns

Weight 5kg
Dimensions 25×35×22cm

Black (00), Old gold (01), Aged copper (02), Oxide (03), Oxide green (04), Oxide blue (05), Aged silver (06), Aged white (07)


There are no reviews yet.

Be the first to review “White bathroom lighting with wave lampshade AP608-TLP02”
Shopping cart
White bathroom lighting with wave lampshade AP608-TLP02White bathroom lighting with wave lampshade AP608-TLP02
121,00 Select options
Scroll to start