Home » Store » Wrought iron small lampshade wall lights AP307-TLP07
Wrought iron small lampshade wall sconces AP307-TLP07
89,54 €
Free shipping
Small straight wrought iron lampshade wall sconces with half-circle arm. Oxide color finish (03). Approximate measurements with lampshade: Width 11cm, height 29cm, depth 24cm.
Small straight wrought iron lampshade wall sconces with half-circle arm. The combination between lighting and furniture are basic in the field of decoration to achieve that bright, warm and welcoming atmosphere that we are looking for. Oxide color finish (03). Approximate measurements with lampshade: Width 11cm, height 29cm, depth 24cm.
Made with a solid iron ball of 50mm diameter with very defined lines. With their classic and timeless lines, wrought iron accessories adapt to any bathroom style. For retro and warm bathrooms, where you need to complement the decoration with some iron. The forging accessories are rounded in shape, robust in appearance and well finished.
The finishes and materials of the wrought iron bathroom accessories also enhance the style of the entire environment. These forged bathroom accessories, then, can be used in both small and large environments, considering their small size.
Small lampshade, made in a dense conical shape for a more specific orientation of the lighting, small and elegant, with a touch of distinction. Industrial design bathroom wall lights have opted for a practical design and enhanced functionality. Small conical iron lampshade, 11×5 cm, TLP07
Finishes
Finishes are given by hand, we refer to the final color of the product. In all products it is possible to choose their finish. We currently have eight different finishes and two additional lacquered ones.
It is free to choose any finish, it does not change the final price of the product. Black (00), aged gold (01), aged copper (02), oxide black (03), brown tone, oxide green (04), oxide blue (05), aged silver (06), aged white (07). Lacquered (51) navy blue, (60) burgundy.
Most of the colors are a treatment (mixture of paints with an application process in which part is applied by hand) and some are spray lacquered, all oven dried.
The process would be as follows, they have an initial layer by immersion in liquid paint and a layer of black lacquered by spray gun and then dried in an oven. Subsequently, the desired tone paint is applied, applied with a brush by hand, and then two coats of colorless lacquer are applied.
Mounting
Wall light installation
Apply wall with everything necessary for installation. Plastic plugs, screws and keys with the appropriate measurements. These have been previously tested in our factory. No adhesives of any kind are supplied, they may vary depending on the surface.
Installation is simple, similar to any type of luminaire. Installation steps: First, for safety, disconnect the light from the electrical panel. Make the holes you need, where the applique will be placed.
Then place the plate that holds the applique. Cables: You can find three cables in the previous installation. All three are important, two essential for current (brown phase and blue neutral), and one for protection, the ground (yellow green). Types of cables and color: Join the brown cables, which are phase, then the blue cables, which are neutral, and finally, the yellow/green cables, which are ground, to the connection of the wall light.
These cables are joined together using a cable connection strip. Then collect the cables and screw the plate with the appliqué trim and that's it. Turn on the power and check that it works well. All our wall lights are checked, both the operation of the Lamp and the ground protection.
To carry out the installation of the wall light you will need the following tools: A drill to make the holes and the 5 mm drill bit equal to the numbering of the plug and a star screwdriver. For the power strip you will need a small, narrow flat screwdriver.
Electrical protection apply
Rustic wall light are protected against indirect contacts. They have a ground connection to protect derivations. It is advisable to use LED lamps of the power and color that best suits your use. The lamp holder is type E-27 (large) or E-14 (small). Protection index IP20 (Indoor use). Voltage 110-240V 50/60Hz. Use LED bulbs, power and color to choose. Ground connection included.
Shipment
Shipping:
Transportation is free for orders greater than the following amounts and destinations. We also indicate the increases for smaller orders.
Delivery time 10days
Destination
Cost
Free
Bills
Peninsular Spain and Portugal
5 €
Spain Balearic Islands
15 €
100 €
Spain: Canary Islands, Ceuta and Melilla
40 €
€100 minimum
40 €
Germany, Austria, France, Belgium,
15 €
100 €
Holland, Denmark, Italy, Luxembourg
15 €
100 €
Ireland, United Kingdom, Switzerland and Norway
40 €
€100 minimum
40 €
Rest of destinations CONSULT
Cost: Shipping costs
Free: For purchases greater than… or minimum order
Expenses: Customs expenses (DUA) or shipping More information on shipping and returns
Weight
1kg
Dimensions
35×11×24cm
Color
Black (00), Old gold (01), Aged copper (02), Oxide (03), Oxide green (04), Oxide blue (05), Aged silver (06), Aged white (07)
Ratings
There are no reviews yet.
Be the first to review “Wrought iron small lampshade wall lights AP307-TLP07” Cancel reply
This website uses cookies so that you have the best user experience. If you continue browsing, you are giving your consent to accept the aforementioned cookies and accept our cookie policy , click the link for more information.
Ratings
There are no reviews yet.