Ceiling lamp three lights vintage lampshade AP7305-TLP03

235,95 

Free shipping

Ceiling light three lights vintage ceiling lampshade with three arms, built at a 45 degree angle, to mount lampshades. Oxide color finish (03). Approximate measurements with lampshade: Width 32cm, height 32cm, depth 19cm.

SKU: AP7305-TLP03 Category: Brand:
Guaranteed Safe Checkout

Ceiling lamp three vintage lights tulip

Ceiling light three lights vintage ceiling lampshade with three arms, built at a 45 degree angle, to mount lampshades. A ceiling light is suitable for any room. Oxide color finish (03). Approximate measurements with lampshade: Width 32cm, height 32cm, depth 19cm.

Made with sets of four small spirals, it is a different and very elegant design. The style is constant change and evolution, with warm and enveloping lines, which give the space the desired feeling of home. Mixture of light and color, a simple combination in pieces that never go out of style. A vintage bathroom can be a classic and elegant environment but it can also be simpler and more romantic.

What distinguishes vintage bathroom accessories from others is a refined and sinuous design that is linked to classic shapes and geometries. The quality offered is always high and of course with an Artehierro production, which adapts perfectly to any type of vintage style bathroom.

Lampshade, manufactured in a conical style, Artehierro design, is made of iron, all its elements are fixed. This collection of bathroom accessories has a marked antique style, designed for period bathroom environments, where iron and wrought iron predominate. Conical iron lampshade, artehierro design, 14×12 cm, TLP03

Finishes

Finishes are given by hand, we refer to the final color of the product. In all products it is possible to choose their finish. We currently have eight different finishes and two additional lacquered ones.

It is free to choose any finish, it does not change the final price of the product. Black (00), aged gold (01), aged copper (02), oxide black (03), brown tone, oxide green (04), oxide blue (05), aged silver (06), aged white (07). Lacquered (51) navy blue, (60) burgundy.

Most of the colors are a treatment (mixture of paints with an application process in which part is applied by hand) and some are spray lacquered, all oven dried.

The process would be as follows, they have an initial layer by immersion in liquid paint and a layer of black lacquered by spray gun and then dried in an oven. Subsequently, the desired tone paint is applied, applied with a brush by hand, and then two coats of colorless lacquer are applied.

Mounting

Wall light installation

Apply wall with everything necessary for installation. Plastic plugs, screws and keys with the appropriate measurements. These have been previously tested in our factory. No adhesives of any kind are supplied, they may vary depending on the surface.

Installation is simple, similar to any type of luminaire. Installation steps: First, for safety, disconnect the light from the electrical panel. Make the holes you need, where the applique will be placed.

Then place the plate that holds the applique. Cables: You can find three cables in the previous installation. All three are important, two essential for current (brown phase and blue neutral), and one for protection, the ground (yellow green). Types of cables and color: Join the brown cables, which are phase, then the blue cables, which are neutral, and finally, the yellow/green cables, which are ground, to the connection of the wall light.

These cables are joined together using a cable connection strip. Then collect the cables and screw the plate with the appliqué trim and that's it. Turn on the power and check that it works well. All our wall lights are checked, both the operation of the Lamp and the ground protection.

To carry out the installation of the wall light you will need the following tools: A drill to make the holes and the 5 mm drill bit equal to the numbering of the plug and a star screwdriver. For the power strip you will need a small, narrow flat screwdriver.

Electrical protection apply

Rustic wall light are protected against indirect contacts. They have a ground connection to protect derivations. It is advisable to use LED lamps of the power and color that best suits your use. The lamp holder is type E-27 (large) or E-14 (small). Protection index IP20 (Indoor use). Voltage 110-240V 50/60Hz. Use LED bulbs, power and color to choose. Ground connection included.

 

Shipment

Shipping:

Transportation is free for orders greater than the following amounts and destinations. We also indicate the increases for smaller orders.

Delivery time 10 days

Destination Cost Free Bills
Peninsular Spain and Portugal 5 €    
Spain Balearic Islands 15 € 100 €  
Spain: Canary Islands, Ceuta and Melilla 40 € €100 minimum 40 €
Germany, Austria, France, Belgium, 15 € 100 €  
Holland, Denmark, Italy, Luxembourg 15 € 100 €  
Ireland, United Kingdom, Switzerland and Norway 40 € €100 minimum 40 €
Rest of destinations CONSULT      

Cost: Shipping costs

Free: For purchases greater than… or minimum order

Expenses: Customs expenses (DUA) or shipping More information on shipping and returns

Weight 4kg
Dimensions 32 × 32 × 19cm
Color

Black (00), Old gold (01), Aged copper (02), Oxide (03), Oxide green (04), Oxide blue (05), Aged silver (06), Aged white (07)

Ratings

There are no reviews yet.

Be the first to review “Vintage three-light ceiling lamp AP7305-TLP03”
Shopping cart
Ceiling lamp three lights vintage lampshade AP7305-TLP03Ceiling lamp three lights vintage lampshade AP7305-TLP03
235,95 Select options
Scroll to start
Spanish