Sunflower bathroom lighting wave lampshade with two arms, built at a 45 degree angle. The functionality of this type of lamp is perfect for illuminating rooms that do not need too much light. Oxide color finish (03). Approximate measurements with lampshade: Width 35cm, height 21cm, depth 22cm.
Made in the shape of a sunflower, with very defined lines and details. A wide range of wall-mounted towel rails and bathroom decoration accessories in a modern design that provides many combination options and stands out for its impressive versatility. To achieve a decorated style in your bathroom you can use a wide range of materials, and you can even combine some of them in perfect harmony.
Those who decide to purchase bathroom decor accessories generally want to reduce clutter in the bathroom. The choice of bathroom decoration accessories highlights the advantage of taking up less space, favoring intelligent solutions.
Wave lampshade, wall lamp with acid tone glass lampshade, has five petals imitating a tulip in bloom for harmonious or retro environments. It has a range of products in perfect aesthetic harmony with each other. Acid glass lampshade, wave design, 12×12 cm, TLP02
Finishes are given by hand, we refer to the final color of the product. In all products it is possible to choose their finish. We currently have eight different finishes and two additional lacquered ones.
It is free to choose any finish, it does not change the final price of the product. Black (00), aged gold (01), aged copper (02), oxide black (03), brown tone, oxide green (04), oxide blue (05), aged silver (06), aged white (07). Lacquered (51) navy blue, (60) burgundy.
Most of the colors are a treatment (mixture of paints with an application process in which part is applied by hand) and some are spray lacquered, all oven dried.
The process would be as follows, they have an initial layer by immersion in liquid paint and a layer of black lacquered by spray gun and then dried in an oven. Subsequently, the desired tone paint is applied, applied with a brush by hand, and then two coats of colorless lacquer are applied.
Wall light installation
Wall light installation
Apply wall with everything necessary for installation. Plastic plugs, screws and keys with the appropriate measurements. These have been previously tested in our factory. No adhesives of any kind are supplied, they may vary depending on the surface.
Installation is simple, similar to any type of luminaire. Installation steps: First, for safety, disconnect the light from the electrical panel. Make the holes you need, where the applique will be placed.
Then place the plate that holds the applique. Cables: You can find three cables in the previous installation. All three are important, two essential for current (brown phase and blue neutral), and one for protection, the ground (yellow green). Types of cables and color: Join the brown cables, which are phase, then the blue cables, which are neutral, and finally, the yellow/green cables, which are ground, to the connection of the wall light.
These cables are joined together using a cable connection strip. Then collect the cables and screw the plate with the appliqué trim and that's it. Turn on the power and check that it works well. All our wall lights are checked, both the operation of the Lamp and the ground protection.
To carry out the installation of the wall light you will need the following tools: A drill to make the holes and the 5 mm drill bit equal to the numbering of the plug and a star screwdriver. For the power strip you will need a small, narrow flat screwdriver.
Transportation is free for orders greater than the following amounts and destinations. We also indicate the increases for smaller orders.
Delivery time 10days
Peninsular Spain and Portugal
Spain Balearic Islands
Spain: Canary Islands, Ceuta and Melilla
Germany, Austria, France, Belgium,
Holland, Denmark, Italy, Luxembourg
Ireland, United Kingdom, Switzerland and Norway
Rest of destinations CONSULT
Cost: Shipping costs
Free: For purchases greater than… or minimum order