Industrial bathroom lamps: Bathroom lamps help us achieve an indirect light effect, thus directing it towards a specific point and providing greater depth. There is always a good place for these types of totally efficient lights.
For retro and warm bathrooms, where you need to complement the decoration with some iron. The forging accessories are rounded in shape, robust in appearance and well finished. These forged bathroom accessories, then, can be used in both small and large environments, considering their small size.
Industrial bathroom lamps, manufactured in a tapered industrial shape, with very defined lines. Industrial is in fashion and every day it has a more important place in the world of decoration. The bathroom is one of the spaces that, with the combination of the right elements, you can give that nostalgic touch of another era.
For all types of bathroom styles, from the most modern to the most industrial or classic. We offer decoration ideas for industrial bathrooms so you can decorate your bathroom following this style.
Location Industrial bathroom lamps
Industrial bathroom lamps cannot be installed within the shower or bathtub area. Ideal as a lighting or decorative element for living rooms, hallways, bathrooms, bedrooms or kitchens. Its E14/E27 socket technology is compatible with LED bulbs, allowing you to choose from a wide variety of light tones to create different environments in living rooms, bedrooms or other rooms.
A beautiful wall lamp for the living room, hallway or bedroom. Given its elegant design, it can be used both in commercial spaces, in shop windows or inside stores, as well as in homes, whether in living rooms, bedrooms, etc.
When purchasing a wall light, you must check that all the necessary elements for its installation come with it (tools are not included). You must find the screws, plugs, wall fixing plate, trim, etc. It will always be indicated by the manufacturer in the instructions.
Follow the recommendations step by step and if you have any questions, consult a professional. We are always at your disposal to answer any questions. Get in contact with us.
Finishes are given by hand, we refer to the final color of the product. In all products it is possible to choose their finish. We currently have eight different finishes and two additional lacquered ones.
It is free to choose any finish, it does not change the final price of the product. Black (00), aged gold (01), aged copper (02), oxide black (03), brown tone, oxide green (04), oxide blue (05), aged silver (06), aged white (07). Lacquered (51) navy blue, (60) burgundy.
Most of the colors are a treatment (mixture of paints with an application process in which part is applied by hand) and some are spray lacquered, all oven dried.
The process would be as follows, they have an initial layer by immersion in liquid paint and a layer of black lacquered by spray gun and then dried in an oven. Subsequently, the desired tone paint is applied, applied with a brush by hand, and then two coats of colorless lacquer are applied.
Wall light installation
Wall light installation
Apply wall with everything necessary for installation. Plastic plugs, screws and keys with the appropriate measurements. These have been previously tested in our factory. No adhesives of any kind are supplied, they may vary depending on the surface.
Installation is simple, similar to any type of luminaire. Installation steps: First, for safety, disconnect the light from the electrical panel. Make the holes you need, where the applique will be placed.
Then place the plate that holds the applique. Cables: You can find three cables in the previous installation. All three are important, two essential for current (brown phase and blue neutral), and one for protection, the ground (yellow green). Types of cables and color: Join the brown cables, which are phase, then the blue cables, which are neutral, and finally, the yellow/green cables, which are ground, to the connection of the wall light.
These cables are joined together using a cable connection strip. Then collect the cables and screw the plate with the appliqué trim and that's it. Turn on the power and check that it works well. All our wall lights are checked, both the operation of the Lamp and the ground protection.
To carry out the installation of the wall light you will need the following tools: A drill to make the holes and the 5 mm drill bit equal to the numbering of the plug and a star screwdriver. For the power strip you will need a small, narrow flat screwdriver.
Transportation is free for orders greater than the following amounts and destinations. We also indicate the increases for smaller orders.
Delivery time 10days
Peninsular Spain and Portugal
Spain Balearic Islands
Spain: Canary Islands, Ceuta and Melilla
Germany, Austria, France, Belgium,
Holland, Denmark, Italy, Luxembourg
Ireland, United Kingdom, Switzerland and Norway
Rest of destinations CONSULT
Cost: Shipping costs
Free: For purchases greater than… or minimum order